Ultra Stick Hangar 9 Specifications download pdf (Page 25)

Radio Installation

Required Parts

• Fuselage

• Receiver

• Servo w/hardware (2)

• Pushrod connector (2)

• Clevis (2)

• 22

" (572mm) pushrod wire (2)

• Hook and loop material

Required Tools and Adhesives

• Screwdriver, #0 Phillips

• Drill

• Felt-tipped pen

• Drill bit: 1/16" (1.5mm), 5/64" (2mm)

• Pliers

 1. Install the rudder and elevator servos into the

fuselage using the hardware provided with the

servos. Remember to drill 1/16" (1.5mm) holes

into the servo tray for the screws.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

No comments

Ultra Stick Hangar 9 Specifications Page 25