Ultra Stick Hangar 9 Instruction Manual download pdf (Page 33)

33Hangar 9 Ultra Stick 40 ARF Assembly Manual

 Step 9

Use sandpaper to roughen the first 1-inch (25mm) of each

end on the 13

-inch (350mm) throttle pushrod rod tube.

Also roughen a 1-inch (25mm) wide section that is 6-inches

(152mm) from one end of the tube.

 Step 10

Insert the tube into the hole drilled earlier. The two-stroke

will have the tube extended 3/4-inch (19mm) forward of the

firewall, while the four-stroke will be flush with the firewall.

 Step 11

The tube will pass through the hole in the former in the

fuselage. Trim the tube at the front edge of the servo tray

using diagonal cutters. Use medium CA to glue the tube to the

firewall and former.

 Step 12

Position the engine so the drive washer is 4

-inches

(124mm) forward of the firewall. Use a pencil to transfer

the locations for the engine mounting screws on the engine

mount rails.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

No comments

Ultra Stick Hangar 9 Instruction Manual Page 33